manualshive.com logo in svg

DUROMAX XP18HPX, User Manual

The DUROMAX XP18HPX is a high-performance power generator that ensures optimal power supply in any situation. With its reliable and efficient design, our user manual provides clear instructions for seamless operation, covering every aspect of this robust machine. Download your free manual now at manualshive.com to maximize your generator's potential.

Share
Download
background image

27

Purge the propane regulator

Hold the propane regulator purge button for 3-5 seconds to 
remove excess air from the propane line.

6.

Turn key switch to START

Turn the engine key switch to the START position to engage 
the starter motor and start the engine. After the engine 
starts release the key to allow it to return to the ON position.

5.

Move the choke lever to RUN

After allowing the engine to preheat, move the choke lever 
to the right-hand side to the RUN position to steady the idle 
speed and run the engine. 

7.

Summary of Contents for XP18HPX







































































Reviews:

No comments

Related manuals for XP18HPX

M+S MM Series Service Manual preview
MM Series
Brand: M+S Pages: 6
3T-Components 3T-MOTORS 3T45-20 Installation & Operating Instructions Manual preview
3T-MOTORS 3T45-20
Brand: 3T-Components Pages: 24
GAPOSA QCF4 Manual preview
QCF4
Brand: GAPOSA Pages: 20
3W 85XI Series Manual preview
85XI Series
Brand: 3W Pages: 20
Scania DI14 69 Operator'S Manual preview
DI14 69
Brand: Scania Pages: 55
Key Automation INT Instructions And Warnings For Installation And Use preview
INT
Brand: Key Automation Pages: 50
FUTABA BLS171SV Manual preview
BLS171SV
Brand: FUTABA Pages: 2
GMC Gasoline V6 90 Degree Applications Manual preview
Gasoline V6 90 Degree
Brand: GMC Pages: 94
Hacker A50-12L Glider Instruction Manual preview
A50-12L Glider
Brand: Hacker Pages: 8
Hacker A50 Turnado Manual preview
A50 Turnado
Brand: Hacker Pages: 8
Hacker 10108787 Operating Manual preview
10108787
Brand: Hacker Pages: 38
PIREZ BBS01 Installation Manual preview
BBS01
Brand: PIREZ Pages: 26
Barrus SHIRE 14 30 WB Manual preview
SHIRE 14 30 WB
Brand: Barrus Pages: 40
Black Bruin B240 Product Manual preview
B240
Brand: Black Bruin Pages: 44
Continental Refrigerator IO-240-A Installation And Operation Manual preview
IO-240-A
Brand: Continental Refrigerator Pages: 146
Mitsubishi FD Instruction Manual preview
FD
Brand: Mitsubishi Pages: 20
WÄRTSILÄ 34DF Series Product Manual preview
34DF Series
Brand: WÄRTSILÄ Pages: 176
Saito FG-36 Owner'S Manual preview
FG-36
Brand: Saito Pages: 12

Brands by name

Popular brands

Load more brands