DUROMAX XP18HPX, User Manual

Page: 66 / 70

WARRANTY (CONTINUED)
66
under warranty must be warranted for a time not less than the remainder of the period prior to the
first scheduled replacement point for the part.
4. Repair or replacement of any warranted part under the warranty must be performed at no
charge to the owner at a warranty station.
5. Notwithstanding the provisions of Subsection (4) above, warranty services or repairs must be
provided at all manufacturer distribution centers that are franchised to service the subject engines.
6. The owner must not be charged for diagnostic labor that leads to the determination that a
warranted part is in fact defective, provided that such diagnostic work is performed at a warranty
station.
7. The manufacturer is liable for damages to other engine components proximately caused by a
failure under warranty of any warranted part.
8. Throughout the emission control system’s warranty period stated above, the manufacturer must
maintain a supply of warranted parts sufficient to meet the expected demand for such parts and
must obtain additional parts if that supply is exhausted.
9. Manufacturer-approved replacement parts that do not increase the exhaust or evaporative
emissions of the engine or emissions control system must be used in the performance of any
warranty maintenance or repairs and must be provided without charge to the owner. Such use will
not reduce the warranty obligations of DuroMax Power Equipment.
10. Add-on or modified parts that are not exempted by the Air Resources Board may not be used.
The use of any non-exempted add-on or modified parts will be grounds for disallowing a warranty
claim made in accordance with this Article. DuroMax Power Equipment will not be liable under this
Article to warrant failures of warranted parts caused by the use of an add-on or modified part.
11. DuroMax Power Equipment shall provide any documents that describe warranty procedures or
policies within five working days of request by the Executive Officer.
Exhaust Emission Warranty Parts List.
1. Fuel Metering System
i. Carburetor and internal parts (and/or pressure regulator or fuel injection system).
ii. Air/fuel ratio feedback and control system.
iii. Cold start enrichment system.
2. Air Induction System
i. Controlled hot air intake system.
ii. Intake manifold.
3. Ignition System
i. Spark Plugs.
ii. Magneto or electronic ignition system. iii. Spark advance/retard system.
4. Air Injection System
i. Air pump or pulse valve.
ii. Valves affecting distribution of flow.
iii. Distribution manifold.