Dürkopp Adler 650-10, Operating Instructions Manual

Page: 86 / 176

Settings via software (OP7000)
Operating Instructions 650-10 - 03.0 - 08/2016 84
6.4.2 Sewing process
1. Select a sewing program (

p. 79 ).

The program number and name of the sewing program are
displayed on the user interface. If no name has been saved
for the selected sewing program,
<No Name>
is displayed.
2. Select the right or left piece to be sewn by tapping .
3. Select sewing material size (

p. 80 ).
4. Push the pedal forwards and sew the seam.

The sewing progress is displayed graphically in the left pane
as a red bar.
Fig. 53: Sewing process

The remaining sewing length per sewing step is displayed:
Correcting the fullness before or during the seam
1. Press Pedal to position 0 .
2. Change the fullness correction using the buttons + F% or - F% .
3. Push the pedal forwards and sew.

The changed fullness value is applied and displayed.