Assembling the remaining thread monitor (1-needle machines)
12
Additional Instructions M-TYPE DELTA - 00.0 - 08/2019
2.2 Assembling the remaining thread monitor
Fig. 7: Assembling the remaining thread monitor (1)
To assemble the remaining thread monitor:
1. Shorten the hose (3) to a length of approx. 130 mm.
2. Shorten the hose (4) to a length of approx. 400 mm.
3. Connect hose (3) and hose (5) using the plug nipple (4).
4. Insert hose (3) at the sensor block (2).
(1) - Cable RFW sensor
(2) - Sensor block
(3) - Hose
(4) - Plug nipple
(5) - Hose
①
①
②
③
⑤
④
