Assembling the throat plate slide interrogator
Additional Instructions 867 M-TYPE - 00.0 - 05/2018
7
Important
Make sure not to pinch off the oil line (8).
Fig. 6: Assembling the throat plate slide interrogator (4)
7. Guide the cable (7) through the clips (9) and lay it along the oil line (8).
Information
The circuit board to which the throat plate slide interrogator is connected
is found behind the valve cover and behind the cover on the side,
respectively, on CLASSIC and PREMIUM machines.
You will, therefore, have to remove different covers in order to connect
the interrogator.
(7) - Cable
(8) - Oil line
(9)
- Clip
⑧
⑦
⑨
⑨
⑨
