Connecting the throat plate slide interrogator
12
Additional Instructions 867 M-TYPE - 00.0 - 05/2018
Assembling the circuit board (if not yet present on PREMIUM
machines)
Fig. 12: Connecting the throat plate slide interrogator (2)
4. Position the socket (6) on the plastic housing (behind the cover on
the side and next to the sewing motor).
5. Position the circuit board (4) over top.
6. Tighten the circuit board (4) through the plastic housing using the
screw (7) and the socket (6).
(4) - Circuit board
(5)
- Plug (of interrogator cable)
(6)
- Socket (not visible)
(7)
- Screw
⑥
④
⑤
⑦
⑦
⑥
④