Assembling the throat plate slide interrogator
Additional Instructions 867 M-TYPE - 00.0 - 05/2018
9
Removing the cover on the side (PREMIUM)
Fig. 9: Assembling the throat plate slide interrogator (7)
12. Loosen the screws (15).
13. Remove the cover on the side (14) and set it down carefully on the
tabletop next to the machine.
The cover on the side (14) is still connected to the machine via the
switch housed in the cover.
Do not pull on the cable.
Fig. 10: Assembling the throat plate slide interrogator (8)
14. Guide the cable (7) with the cable ties (16) up and along the other
cables towards the circuit board.
You have successfully assembled the throat plate slide interrogator.
You can now connect the throat plate slide interrogator (
(14) - Cover on the side
(15) - Screw
⑮
⑭
(7) - Cable
(16) - Cable tie
⑯
⑯
⑦
