Page
23
Dura
®
LIFESTYLE
LIFESTYLE
Whitford
3.1 Top plate and door flashing attachment
•Regarding Part IDs refer to the Parts list in pages 4 & 5.
FFT002
Centralise front top plate flashing (FFT002) and attach with four 30mm clouts to top plate.
FDJ002
FDF001
FDJ002
1
2
• Position door jamb flashing (FDJ002), so top is level with underside of lintel (TL001).
• If required, notch bottom of flashing around concrete using tin snips.
• Nail door jamb flashing to inside of stud using three 30mm clouts and screw it into stud through
the front of wall cladding using three 55mm Tek Screws.
3
Screw door top flashing (FDF001) to lintel (TL001) using three 55mm Tek Screws (1 at each end and
1 in the middle). Door top flashing length will protrude about 10mm past outside edge of each door
jamb flashing.
3. Flashing attachment
