TUF 100 ROOF
fig. 1
7
Step 1: Note:
Condensation can form on the under side of shed roof. If building paper is required, fit now.
Building paper will need to be supported by netting or roofing twine.
Roof:
Position Roof Sheets as shown in
fig 1
. Make sure sheet joins at the back of the roof are flush.
Rivet sheet joins, one rivet 200mm back from edge front and back. Fit two more rivets evenly spaced in cen-
tre of each join.
Step 3:
Line up ribs on the roof with ribs on the
walls. While someone holds the Front Plate
straight, nail the roof to Top Plate using
one 40mm Weatherseal nail beside each
rib. Repeat at the back.
Step 4:
Fit Roof Flashing as shown. When posi-
tioned correctly rivet through Roof Flashing
into Roof Sheet joins.
Step 2:
Position Roof so that the front
overhang measures 140mm.
Rivet roof to wall sheets using
one rivet every second Rib. Re-
peat at the other end ensuring
overhang measures 140mm.
