6
TUF 100 WALL CLADDING
Birds Eye View
D008
= Rivet
= 30mm Clout
Step 2:
NOTE:
It is very important that the Wall
Sheets are positioned exactly as shown in
the
cladding detail
diagram on the previous
page.
Position Corner Wall Sheets. Check that the
Lip is on the correct side of the sheet. While
holding Corner Wall Sheet flush with the top
of the Top Plate, nail to plate using only one
30mm clout top and bottom.
Step 5:
Drill a hole through Door Jamb Flashings
and Wall Sheets top and bottom. Nail with
50mm nails
(fig. 1)
.
Nail left hand Door Jamb Flashing to Stud
using three 30mm Clouts at equal spacings
(fig. 1)
. Beside each 30mm Clout, rivet
Door Jamb Flashing to Rib. Repeat with
right hand Door Jamb Flashing.
Step 3:
Position All remaining Wall Sheets. Ensure
they overlap correctly then rivet to Corner
Wall Sheets, one rivet top and bottom on
each overlap.
Step 4:
Nail Wall Sheets to Plates, two 30mm Clouts per pan top and bottom.
Nail Wall Sheets to Wall Nogs, one clout per pan.
