8
TUF 100 DOOR
Step 1:
Place shed in final position. Check diagonal
measurements are equal and shed is level
before fitting door.
Step 2:
Hold Door in position (approximately 5mm down from Top
Plate Flashing) and fit one rivet to top hinge. While still hold-
ing in position fit one rivet to bottom hinge.
Step 3:
Close door and check it fits correctly.
If not, drill out rivets and make necessary adjust-
ments. Fit remaining rivets to all three hinges.
Step 4:
Using rivets attach padbolt as shown.
NOTE: If shed has an optional security upgrade, please use Security door instructions on next page.
