14
14
14
FLASHINGS
• Screw corner fl ashings onto each corner, using six 55mm tek screws per
corner. Top screws should be approx 250mm down from top of top plate.
• Ensure corner fl ashings are square and parallel with walls panels.and top of
fl ashings are level with top of top plate.
• Position door jamb fl ashing, so top is level with underside of lintel.
• Using tin snips, knotch bottom of fl ashing around concrete or ply fl oor if
required.
• Attach using three 30mm clouts, nailed to inside of stud and three 55mm tek
screws, screwed through front wall cladding into stud.
• Position door top fl ashing into position. (Note fl ashing length will protrude
approx 10mm past outside edge of each door jamb fl ashing).
• Using three 55mm tek screws,(one each end and one in middle) screw fl ashing
to lintel.
