3
SAFETY PRECAUTIONS:
When the safety precautions are followed,
the Brushless Evader will provide years
of enjoyment. Use care and good sense
at all times when operating this radio
controlled vehicle. Failure to use this vehicle
in a safe, sensible manner can result in
injury or damage to property. You and you
alone must insure that the instructions are
carefully followed and all safety precautions
are obeyed.
➤
Do not operate the Brushless Evader near
people. Spectators should be behind the
driver or at a safe distance away from the
vehicle.
➤
Make sure to read the instructions with the
battery and charger before charging.
➤
Do not leave any charger unattended
during charging. If the battery or charger
become hot at any time, disconnect the
battery from the charger immediately!
Failure to do so may cause permanent
damage to the charger and battery and
may cause bodily harm.
➤
When charging LiPo battery packs, always
use a charge bag such as GPMP0751.
➤
The Brushless Evader features waterproof
electronics allowing you to run in almost
any conditions. However, to achieve long
life, avoid immersing completely in water.
After you are finished running, make sure
that the electronics are dry to help avoid
corrosion.
➤
Always turn on the transmitter before
turning on the electronic speed control.
HELPFUL HINTS:
➤
Avoid working over a deep pile carpet. If
you drop a small part or screw, it may be
difficult to find.
➤
Place a mat or towel over your work area.
This will prevent parts from rolling off and
will protect the work surface.
➤
Avoid running the vehicle in cold weather.
The plastic and metal parts can become
brittle at low temperatures. In addition,
grease and oil become thick, causing
premature wear and poor performance.
SPECIFICATION AND
DESCRIPTION CHANGES:
All pictures, descriptions and specifications
found in this instruction manual are subject
to change without notice. Duratrax maintains
no responsibility for inadvertent errors in this
manual. Visit
duratrax.com
for the latest
updates and information for your model.
WARRANTY:
➤
Duratrax
®
guarantees this kit to be free from
defects in both material and workmanship at
the date of purchase. Duratrax will warranty
this kit for 90 days after the purchase date.
Duratrax will repair or replace, at no charge,
the incorrectly made part.
➤
Make sure you save the dated receipt or
invoice you were given when you bought your
model! It is your proof of purchase and we
must see it before we can honor the warranty.
Further, Duratrax reserves the right to change
or modify this warranty without notice.
➤
In that Duratrax has no control over the
final user assembly or material used for
final user assembly, no liability shall be
assumed nor accepted for any damage
resulting from the use by the user of the
final user-assembled product. By the act
of using the user-assembled product, the
user accepts all resulting liability.
To return your Brushless Evader for repairs
covered under warranty you should send
your vehicle to:
Hobby Services
3002 N. Apollo Drive Suite 1
Champaign, Illinois 61822
Attn: Service Department
Phone: (217) 398-0007 9:00 am-5:00 pm
Central Time M-F
E-mail: [email protected]
www.hobbyservices.com
If the buyer is not prepared to accept the
liability associated with the use of this
product, the buyer is advised to return
this kit immediately in new and unused
condition to the place of purchase.
STRESS-TECH PARTS
GUARANTEE:
We have engineered the Brushless Evader to
take the rough and tumble abuse that makes
R/C fun. We are
so confident of
the quality and
durability of the
Stress-Tech plastic parts that we will replace
any Stress-Tech plastic part you break during
the first 12 months you own the Brushless
Evader. Just send in the part to us and we will
send you a FREE replacement. Please see
the Brushless Evader parts list for the items
covered under the Stress-Tech guarantee.
To receive your free replacement part
please send the following to the Hobby
Services address listed above.
➤
1. The broken part must be included.
➤
2. The part number and description of the
broken part.
➤
3. Copy of your dated invoice or
purchase receipt.
➤
4. Your name, phone number and
shipping address.
REPAIR SERVICE:
Repair service is available anytime.
➤
After the 90 day warranty, you can still
have your Brushless Evader repaired for a
small charge by the experts at Duratrax’s
authorized repair facility, Hobby Services.
➤
To speed up the repair process, please
follow the instructions listed below.
1. Under most circumstances return the
ENTIRE vehicle. The exception would
be sending in a Stress-Tech part. See
the instruction under the Stress-Tech
Guarantee.
2. Make sure the transmitter is turned
off, and all of the batteries are removed.
3. Send written instructions which include:
a list of all items returned, a THOROUGH
explanation of the problem, the service
needed and your phone number during
the day. If you expect the repair to be
covered under warranty, be sure to
include a proof of date of purchase (your
store receipt or purchase invoice).
4. Send to Hobby Services at the address
shown. When shipping your item(s) to us,
we recommend that you insure it and use
a company that offers a tracking service
(such as Federal Express Ground or
UPS Ground).
Our staff will carefully inspect your item and
notify you of their findings, at which time you
will be notified of your options for return,
repair, or replacement. Please note that
items sent back unrepaired will still carry a
service charge and return shipping.
Hobby Services accepts Visa
®
and
Mastercard
®
, or you can send in a check.
Additionally we can return the item C.O.D.,
but additional charges apply.
IMPOR
T
ANT
082E
