4
4
FINISHING
6-CELL BATTERY INSTALLATION
RECEIVER ANTENNA INSTALLATION
DO NOT CUT THE ANTENNA WIRE!
+
+
+
+
–
–
–
Battery
Tray Door
TRANSMITTER PREPARATION
AA BATTERIES x4
Your radio system’s transmitter and receiver are preset at the
factory. If your radio system needs to be rebound:
1. Remove the radio box lid.
2. Turn on the transmitter and receiver.
3. Carefully press the bind button on the top of the receiver and
hold it down until the L.E.D. is lit solid green.
The L.E.D. indicates the receiver’s status:
Red:
No signal being received.
Blinking
Green:
Receiver is detecting a signal from a transmitter it is not bound to.
Solid Green:
Working
,
the
receiver is detecting a signal from the transmitter it is bound to.
RADIO SYSTEM CHECK
LED
