DuraTech Industries HAYBUSTER CMF-710, Operating Instructions Manual

Page: 5 / 150

i C M F - 7 1 0 T A B L E O F C O N T E N T S
F O R E W O R D
Foreword
All personnel must read and understand the following sections before operating the
CMF-710 VERTICAL MIXER.
Appropriate use of unit\Introduction
Your model CMF-710 is designed to cut, mix and distribute feed rations including
baled forage. It is designed for all bale sizes and ration moisture contents.
To avoid possible damage to the machine and risk of injury to the operator,
consult with a DuraTech Industries International, Inc. (DuraTech
Industries) representative before attempting to mix and distribute
materials other than livestock forage.
The CMF-710 is used to mix hay and forage with grain and other supplements to
feed livestock. The front conveyor with optional left, right or tandem discharge
makes distribution of forage mix easier.
Statement of Misuse
This vertical mixer is not to be used for any purpose other than for which it is
intended as explained in the operator’s manual, advertising material and other
pertinent written material prepared by DuraTech Industries. Any machine subject to
misuse may cause personal injury or death, and void manufactures warranty.