DuraTech Industries HAYBUSTER CMF-710, Operating Instructions Manual

Page: 37 / 150

25
C M F - 7 1 0 O P E R A T I N G I N S T R U C T I O N S
3.10 Removing the CMF-710 from storage
To remove the CMF‑710 from storage, perform the following steps:
1. Remove all protective coverings.
2. Remove blockings from under the CMF‑710. Check tire pressure.
3. Lubricate machine in accordance with lubrication instructions found in this manual.
4. Check the conveyor chain tension.
5. Check all hydraulic hoses for deterioration and, if necessary, replace. Tighten any loose bolts, nuts and
hydraulic fittings.
6. Follow pre‑starting inspection instructions.
3.11 Normal shut-down procedure
Warning: For your safety and the safety of others, you must use the following normal shut‑
down procedure before leaving the tractor controls unattended for any reason, including servicing
, cleaning, or inspecting the CMF‑710. A variation of the following procedure may be used if so
instructed within this manual or your tractor manual or if an extreme emergency requires it.
1. Disengage P.T.O.
2. Place transmission in park or set park brake.
3. Shut off machine and remove key.
4. Wait for all movement to stop.
5. Engage tractor park brake, turnoff and remove key engine prior to entering the tub and/or making any
adjustments to CMF.
figure 3.8
light kit for the CMF-710
3.12 Light Kit