22
C M F - 7 1 0
O P E R A T I N G I N S T R U C T I O N S
figure 3.7
Safety chain installation
8. Connect the two hydraulic hoses from the hydraulic door cylinder to one set of hydraulic couplers on
the tractor. Connect the two hydraulic hoses from the discharge conveyor to the second set of hydraulic
couplers on the tractor. Connect the two hydraulic hoses from the extension conveyor to the third set of
hydraulic couplers on the tractor.
9. If equipped with a rear door and/or second extension conveyor, connect the two hydraulic hoses from
each to the fourth and/or fifth hydraulic couplers on the tractor.
3.4 Unhitching the CMF-710
To unhitch the CMF‑710, perform the following steps:
Warning:
Never unhook the CMF‑710 with material in tub.
1. Follow normal shut‑down procedure.
2. Lower jack and secure. Raise the tongue off the tractor draw bar.
3. Place wheel chocks under wheels to keep from rolling.
4. Detach the P.T.O. shaft from the tractor.
5. Cycle the hydraulic control levers to release any pressure in the hydraulic hoses.
6. Detach the hydraulic hoses.
7. Remove the safety chain, if installed.
8. Remove the hitch pin.
6. This machine is set up to operate on 1000 rpm only!
7. If required, install the safety chain. Check local regulations regarding safety chain requirements. Refer to
figure 3.7
Summary of Contents for HAYBUSTER CMF-710
