Instruction Manual
P-2800 & P-2800D Hand Pumps - V1.1 www.durapac.com
Page 2 of 12
This is a safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid injury or death
1.0
Product Information
DURAPAC – Hand Pumps are engineered to meet Industrial Standards for Performance and Safety.
The
P-2800
is a high flow, 2 speed hand pump with a
2 way valve
designed to be used with single
acting hydraulic equipment.
The
P-2800D
is a high flow, 2 speed hand pump with a
4 way valve
designed to be used with double
acting hydraulic equipment.
Both models are the ultimate in high performance two speed portable power. They are ideally suited
to operate high tonnage cylinders where conventional power sources are not available. Both models
feature a first stage high flow of 113cc per stroke for fast cylinder advance and retract and a high
pressure power flow of 4cc per stroke. The pumps are a robustly built, industry proven performer.
Special skill, knowledge and training may be required for a specific task and the product may not be
suitable for all jobs. The user must ultimately make the decision regarding suitability of the product
for any given task and assume the responsibility of safety for all in the work area. Contact a Durapac
representative if you are unsure of your pumps suitability for a particular application.
2.0
Receiving Instructions
It is recommended prior to use that an inspection be done by qualified personnel and that any
missing or damaged parts, decals, warning/safety labels or signs are replaced with Durapac
authorised replacement parts only. Any hand pump that appears to be damaged in any way, is worn,
leaking or operates abnormally should be removed from service immediately until such time as
repairs can be made. Any hand pump that has been or suspected to have been subject to a shock
load should be removed from service immediately until inspected by a Durapac authorised service
centre. Owners and operators of this equipment should be aware that the use and subsequent
repair of this equipment may require specialised training and knowledge.
3.0
Safety
Save these instructions. For your safety, read and understand the information contained within. The
owner and operator should have an understanding of this product and safe operating procedures
before attempting to use this product. Instructions and safety information should be conveyed in the
operator's native language before use of this product is authorised. Make certain that the operator
thoroughly understands the inherent dangers associated with the use and misuse of the product. If
any doubt exists as to the safe and proper use of this product as outlined in this factory authorised
manual, remove from service immediately.
DANGER:
To avoid personal injury keep hands and feet away from work area during operation
Do NOT
handle pressurised hoses. Escaping oil under pressure can penetrate the skin
causing serious injury. If oil is injected under the skin, see a doctor immediately
