Attach each Side Panel (SP ) on top to the
Roof Structure (RS1A, RS3E). Using a dia.
3mm (1/8”) drill with a power drill, make two
equal distance holes on the Side Panel through
the Roof Structure. Drive a self tapping screw
(S4) through the Side Panel to the Roof
Structure.
S4
SP
RS1A
Side Panel
Roof Structures
S4
Base U-channel
S4
The ‘DURAMAX’ shed has been tested and passed wind loads of up to 115 mph in a controlled
laboratory environment. Natural high wind areas create wind at unpredictable speeds that are
very difficult to capture accurately by location. As such we cannot guarantee the performance
of the shed in these extreme situations.
Important Warranty Information
“We recommend to clear snow from the Roof top after each Snowfall.”
32
2
3.0mm.(1/8”)
SP
RS1A
RS3
RS1A
