35
3.
Attach each side panel
(SP )
on top to the roof
structure
(RS1)
and
(RS3)
. Using a dia. 3mm (1/8”)
drill with a power drill, make two equal distance
holes on the side panel through the roof structure.
Drive a self tapping screw
(S4)
through the side
panel to the roof structure. Repeat this for every side
panel. See blowup.
The Duramax shed has been tested and passed wind loads of up to 115 mph in a controlled
laboratory environment. Natural high wind areas create wind at unpredictable speeds that are
very difficult to capture accurately by location. As such we cannot guarantee the performance
of the shed in these extreme situations.
RS1
S4
RS1
Base U-channel
Side Panel
(RS1) & (RS3)
roof structure
S4
S4
Important Warranty
Information