background image

ITEM : WC-1515 
REVISED JAN 16, 2015

  

Printed in Vietnam

 

              

 - 1 - 

ASSEMBLY INSTRUCTIONS

 

 

 

PLS NOTE: THE BUTHER BLOCK TOP HAS BEEN TREATED WITH SYNTHETIC OIL, WHICH WILL ENHANCE 
THE GRAIN OF THE WOOD. 
BUT, MOST IMPORTANTLY, THIS TREATMENT WILL ASSIST IN MINIMIZING POTENTIAL CRACKING OF THE 
WOOD. 
WE STRONGLY RECOMMEND TREATING THE TOP ABOUT EVERY 6 MONTHS, IN ORDER TO MAXIMIZE THE 
LIFE OF YOUR ISLAND. 
WHEN YOU APPLY OIL, PLS BE SURE THAT THE OIL IS SAFE FOR CONTACT WITH FOOD. 

Do not use vegetable or olive oils because they can turn rancid

. Food Grade Mineral oil remains safe 

throughout its life. There are various oils available for cutting boards and butcher blocks. Some are called 
"Butcher Block Finishes" or "Mystery Oil." Save some money by visiting the local hardware or drug store and 
purchasing Mineral Oil. (not mineral spirits - this is paint thinner) 

When you see the words "food safe finish" in a description of a wood product, this generally means mineral 
oil has been used. Simply wipe mineral oil on the surface of your board and watch it soak in. When the wood 
won't take any more oil, you can wipe off the excess with a clean dry cloth. Don't worry about applying too 
much oil - more is better. 

 
 
 

 
 

 

Description
Item No.  
 

:  TROLLEY CART
:  WC-1515 

Summary of Contents for WC-1515







Reviews: