The
Graphics
Tab under
Dithering
allows you to adjust the contrast of colors. Do not
apply dithering to monochrome (one color or no gray) sections of printing because it
may appear fuzzy. Select
None
then click
Apply
when all settings have been made.
11
10
Under
Stocks
, select “USER (4.00 in x 6.00 in)” and click
Edit
. This brings up the
Edit Stock dialog box.
Set the
Label Width
and
Label Height
to 4.00 x 40.00. Take note of the
Exposed
Liner Width
measurements, as they should be set to “0” if printing on continuous
rolls of media. Click
OK
when finished. You can use this stock when printing any
label that is 4.00 by 40.00 in. or smaller.
Since you won’t need the other stock sizes, select and delete each one using the
delete button. You should now have one stock named “USER (4.00 in x 40.00 in).”
