D-FL 200 / Rev. 6
26
______________________________________________________________________________________________________
Industrie Elektronik GmbH & Co KG
-
the project name,
-
the order no.,
-
the system number and
-
the responsible person/company
can be entered.
(Fig. 22) First page / Main
10.3.2. Second Page / Parameter
With the "Read“-Button the actual parameters are requested from the system. If any of the parameters
in the system is different from the contents of the entry field before, then this entry field is marked red.
In that case the parameter of the system is displayed. If the contents of the entry field and the system
parameters are equal the entry field remains white.
With the "Write“-Button the parameters from the PC are sent to the D-FL 200-10. The state-bar in the
lower part of this page tells the actual state of the communication.
The special parameters R22 - R33 are normally not visible. This is because the normal user doesn’t
need to change these values. They were pre-programmed by the manufacturer. Nevertheless these
parameters become visible after opening "Special Parameters“ and the "Visible“-bar in the menu have
been selected. The parameters can only rewritten into the system if the correct code2 is entered into
the entry box.
