D-FL 200 / Rev. 6
15
______________________________________________________________________________________________________
Industrie Elektronik GmbH & Co KG
5.2. Electrical Connection of the D-FL200-20 Transducers
The transducers are delivered with a plug connection. The terminal layout is shown in
(Fig. 17) Layout
of the transducer plug.
(Fig. 17) Layout of the transducer plug
The sensor electronics are located in the transducer, along with a terminal strip. This terminal strip was
wired to the plug at the factory. The pin-out of this connector is shown in
(Fig. 18) Layout of the
terminal strip on the sensor board.
(Fig. 18) Layout of the terminal strip on the sensor board
