background image

www.tsicustomerservice.com

A517

9

FCC/IC INFORMATION

BATTERY REPLACEMENT

Note:

Battery disposal

Please always dispose of batteries
at a suitable recycling point. 

 

    Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could 

    void user’s authority to operate the equipment.

    NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 

    15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 

    residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and 

    used in accordance with the instructions, may cause harmful interference to radio communications. 

    However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

    harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  

    user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and the receiver.

  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

  • Consult the dealer or an experienced radio/TV technician for help.

 

  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

 

  (1) This device may not cause harmful interference, and

  (2) this device must accept any interference received, including interference that may cause undesired operation.

 

       This Class B digital apparatus complies with Canadian ICES-003.

NOTE:  Do not mix old and new batteries.

 

Do not mix alkaline, standard (carbon zinc), or rechargable (nicad, nimh, etc.) batteries.

       

CAUTION:

• Do not ingest batteries.

• Non-rechargeable batteries are not to be recharged.

• Batteries are to be inserted with the correct polarity.

• Exhausted batteries are to be removed from the product.

• Always purchase the correct size and grade of battery most suitable for the intended use.

• Replace all batteries of a set at the same time.

• Clean the battery contacts and also those of the device prior to battery installation.

• Remove used batteries promptly.

Batteries not included

Summary of Contents for 10ILH100-01












Reviews: