4. Replace the steam cleaner above a sink or a bucket. Unscrew and remove the boiler drain cap (25).
Empty the vinegar solution into the sink or bucket.
5. Flush the system with clean water by refilling the water tank with 0.8 gal / 3 L of water, reconnecting the steam cleaner to a power outlet and
turning the steam cleaner
ON (9). Do NOT press the boiler activation button (10)! At this point the boiler drain cap (25) is still removed.
6. Let the water drain into the sink or bucket from under the machine until the water tank is empty.
7. Replace the boiler drain cap (25). Refill the water tank with 0.8 gal / 3 L of clean water.
8. Turn
ON the steam cleaner by pressing the main power button (9) and the boiler activation button (10).
WARNING:
It is not recommended that you use any other chemical to clean this product. doing so will automatically void the warranty.
CAUTION:
Clean the water level limiting device regularly and examine it for signs of damage
ATTACHMENT COUPLINGS
If the attachment connection s dry up after intensive use or if it difficult to put them together,
put a small amount of petroleum jelly (Vaseline) around the O-rings on the male attachment.
VACUUM MAINTENANCE
To empty the vacuum, remove the vacuum head (1) and drum (5) by lifting the 4 holding clamps (4) and disconnecting
the vacuum electrical cord (8). Empty the vacuum and clean the drum (5), the float and the vacuum head filter (3) with water.
WARNING:
Do not immerse in water.