3-11
Chapter 3 ADVANCED OPERATION
2. Custom Folding of Standard Paper
Custom folding is the method of folding paper where you specify the folding stoppers of the first and
second folding plates. The following describes the custom folding procedures taking accordion fold as
an example.
Side guide
Fixing screw
Side guide
Fixing screw
1
Loosen the fixing screws of the side
guides, and move the side guides to
fit the paper width.
Paper
Paper set lever
Guide plate
2
Raise the paper set lever and place
some paper on the paper feed table.
Push in the paper until its lead edge touch-
es the guide plate.
Side guide
Side guide
Fixing screw
Fixing screw
3
After pressing the side guide to each
side of the paper lightly, tighten the
screws to secure the side guides.
Paper set lever
4
Lower the paper set lever.
The paper feed table will be raised.
Make sure that you lower the paper set
lever. If you start operations without the
paper set lever lowered, the paper feed
rings will run idle, causing the machine
to stop.
Summary of Contents for DF-755
