Duplo DC-6 Mini Instruction Manual Download Page 9

Page: 9 / 100

vii

Notes on Safety (Please Read and Observe)

CAUTION

●

Caution for Cleaning

●

Before cleaning the machine, turn off the power switch and unplug the power

cord.

→

If the machine is activated accidentally, it may cause injury.

●

Do not use

ammable sprays or solvents inside or near the machine.

→

Gas may accumulate inside the machine causing a

re or explosion.

●

Preventing Injury to Hands or Fingers

●

The optional perforation unit contain uncovered tools. Keep your hands or

ngers

off inside those.

●

Use tweezers or a similar tool to remove jammed document.

Be sure to unplug the power cord before removing jammed document in order to
prevent an electric shock.

●

Caution for Installation

WARNING

●

The machine must be installed by service person only.

→

If you want to change installation location, contact your service person.

(Changing location requires precise adjustment.)

●

Once the machine is in position, secure in place using the casters.

→

If the machine falls over, this could result in personal injury.

WARNING

Summary of Contents for DC-6 Mini





































































































Search results

Summary of Contents for DC-6 Mini

Reviews:

Related manuals for DC-6 Mini

Brands by name

Popular brands

Duplo DC-6 Mini, Instruction Manual

Search results

Summary of Contents for DC-6 Mini

Reviews:

Related manuals for DC-6 Mini

Brands by name

Popular brands