Duplex JET VAC ALPHA, Manual

Page: 15 / 20

JET VAC ALPHA
9. BEFORE REFERRING TO THE TECHNICAL SERVICE
PROBLEM POSSIBLE CAUSE REMEDY
MACHINE DOES NOT LACK OF POWER. MAKE SURE PLUG IS WELL INSERTED (1)
PRODUCE STEAM AND AND THAT THERE IS MAIN POWER TO THE
VACUUM DOES NOT WORK. OUTLETS.
THE RED "LOW WATER" ALL THE WATER HAS BEEN CONSUMED. REFILL THE WATER TANK (5A) WITH
INDICATOR (2) LIGHTS UP. CLEAN WATER.
SUCTION POWER IS MISSING. A. LACK OF POWER TO THE A.C) MAKE SURE THE SWITCH (18) IS
VACUUM CLEANER. ON AND THE PLUG (20) IS WELL
B. THE VACUUM TUBE IS
INSERTED. (10)
OBSTRUCTED. B.B) CLEAN TUBE AND ACCESSORY
C. THE VACUUM DRUM (12) IS
USED.
FULL OF WATER. C.EMPTY THE VACUUM DRUM (4).
WATER LEAKS THROUGH THE CHECK THE WEAR OF THE CLEAN AND LUBRICATE THE O-RING WITH
CONNECTIONS OF THE
O-RING.
GREASE.
ACCESSORIES.
IF NECESSARY, REPLACE WITH ONE
SPARE SUPPLIED.
STEAM DOES NOT COME OUT. A.BOILER HAS NOT REACHED YET A. WAIT A FEW MINUTES.
THE OPERATIONAL PRESSURE
B. SWITCH ON THE STEAM
(GREEN LIGHT (3) IS OFF).
COMMAND SWITCHES (36-37).
B. STEAM COMMAND SWITCHES (36-
C. USE THE STEAM COMMAND
37) ARE OFF.
SWITCH (34) TO ACTIVATE THE
A) THE STEAM COMMAND SWITCH (34) STEAM FLOW..
HAS NOT BEEN USED..
DROPS OF WATER COME OUT AT BEGINNING OF WORK WATER AFTER A FEW MINUTES OF USE THIS
OF THE ACCESSORIES
CONDENSES IN THE TUBES AND
PROBLEM WILL CEASE. IF IT CONTINUES,
ACCESSORIES DUE TO THE
DIFFERENCE IN TEMPERATURE. PROCEED TO THE CLEANING OF THE
BOILER.
NOISE INSIDE THE GENERATOR. WHILE COOLING DOWN, THE BOILER, WAIT FOR THE PRESSURE STABILIZATION
AFTER 6-7 HOURS, IS CREATING AN (ABOUT2-3MINUTES),THENOIS
INTERNAL DEPRESSION, WHICH AT EACH DISAPPEARS.
IGNITION, PROVOCES SOME VIBRATIONS..
ACCESSORIES DO NOT FIT THERE IS DIRT BUILD UP IN THE JOINTS CLEAN AND LUBRICATE THE JOINTS.
PERFECTLY AND LOCK/RELEASE LATCHES (40).
15 DUPLEX