5
Note:
The
CO² Armatur Pro
is equipped with an integrated reflux valve that protects the fitting against reflux water.
Technical data:
Gas type:
CO², connection according to DIN 477 Part 1
Connections:
output for CO² hose
connection number:
6
Microfilter:
2 units installed
Operating pressure:
0 – 3 bar
Material:
nickel-plated brass
Pressure gauge connection: 2 x G 1/4“
Weight:
approx. 960 g
Valve spindle:
stainless stee
Illustrations are non-binding. Technical details are subject to change.
CO² Solenoid Valve Pro
(item no. 80243)
Recommended accessories:
For semi-automatic or fully automatic control there is the option to retrofit a CO²
Solenoid Valve Pro. The CO² Solenoid Valve Pro is screwed between the fitting and the needle valve
1
. Remove the
needle valve from the needle valve. Then connect the needle valve to the connecting screw of the CO² Solenoid
Valve Pro
3
. It is essential that you wrap the outer thread of the connections with 4 – 5 layers of Teflon tape
2
(included in the delivery) to ensure 100 % tightness. Then screw the completely assembled CO² Solenoid Valve Pro
into the fitting
4
. Align the CO² Solenoid Valve Pro and check the threaded connections for tightness!
1
5
2
6
3
4
7
8
1
3
2
4
