All dimensions are approximate and subject to the limitations of the material used and the methods of manufacture
Page 17
1x
IS28.1230.B
1x
J.1960 (cut to suit)
Trims above the door
IMPORTANT - Check that the cabin is square and the walls are level
IMPORTANT - Use a step ladder to install all the trims. Do not put your
weight on the roof before all roof boards are secured
Position door frame add-on on top of the door frame and against front
and side wall
Pre drill holes
To secure door frame add-on use 4x 120mm screws. Screw vertically
into a door frame, do not fix it to the walls.
Measure and cut to suit J.1960 trim (see diagram - left)
Secure cut to size J.1960 trim to the wall logs like shown below
using 50mm screws, do not fix it to the door frame
50mm screws
120mm screws
Flush
IS28.1230.B
J.1960 (cut to suit)
Flush
