Dunelm DUN30735021, Manual, Page: 8 / 16

ENVIRONMENT
The machine may work well in a wide range of temperatures, but there could be
a difference in loaf size between a very warm room and a very cold room. We
suggest the room temperature should be between 15
℃
and 34
℃
.
Bread can be automatically kept warm for 60 minutes after baking. If you would
like to take the bread out, switch the program off with the START/STOP button.
1
、
Please check if all parts and accessories are complete and free of damage .
2
、
Clean all the parts according to the latter section“Cleaning and Maintenance”
3
、
set the bread maker in baking mode and bake empty for about 10 minutes.
After cooling it down clean once more.
4
、 Dry all parts thoroughly and assembly them, so the appliance is ready for using.
NOTE:
The temperature in bread maker is lower than room temperature if placing
bread maker in cooler place (such as air conditioning room, cold storage) after a
period of time and then move it to normal room temperature immediately to
make bread
．
WARNING DISPLAY:
1
、
If the display shows “ HHH ” after the program has been started, (see below
figure 1) the temperature inside is still too high. Then the program has to be
stopped. Open the lid and let the machine cool down for 10 to 20 minutes.
2
、
If the display shows “
Err
” after you have pressed
START/STOP
, (see below figure
2) the temperature sensor is disconnected please check the sensor carefully
by Authorized expert.
3
、 If the display shows“
LLL
”after pressing the
Start/Stop
button ( except the
programs BAKE), it means the temperature inside is too low
（
accompanied
by 5 beep sounds
）
, stop sound by pressing the
Start/Stop
button, open the lid
and let the machine rest for 10 to 20 minutes to return to room temperature.or
select the BAKE program and make the temperature inside the chamber incre
ase rapidly”
FUNCTION INTRODUCTION
FOR THE FIRST USE
6
Figure 1 Figure 2 Figure 3
1. Put bread slice into the bread slot which can be inserted two slices at most
every time. Only the regular slice can be placed into the bread slot. The
irregular bread can only be toasted on the toast rack.
NOTE:
Make sure the crumb tray is completely positioned in place before
using.
2. Plug the power cord into the outlet.
3. Set color control slide key to your desired color. There is 7-position level, the
lowest “1” is for light and the highest “7” is for dark. The bread slice can be
toasted to golden color at the middle position.
NOTE:
1). Toasting color for one slice is darker than that for two bread slices at the
same level.
2). If toasting continuously, toasting color for the latter bread is darker than
that for the anterior bread at the same level.
4. Lower carriage handle down vertically until it is latched in place, the indica-
tor of Cancel will be illuminated, and the appliance will begin toasting at
once.
NOTE:
The carriage handle can only be latched when the appliance is
plugged in.
5. Once the bread has been toasted to the preset color, the carriage handle