ph: 519-923-9813 | [email protected]| web: www.dundalkleisurecraft.com
Fig 2a
Fig 2b
Using an 11/16” (18mm) bit, drill approximately ¾”
(19mm) into your pre drilled holes to create a cavity for
the plugs to sit in later.
8
Outdoor Pure Cube Sauna
Assembly Instructions
Secure the door frame to the last corner post using the
2 ¾” (70mm) Connector lag screws through the pre
drilled holes.
Line up one of the window panels flush to the corner
post and secure it using the 2 3/4” Connector lag screws
through the pre drilled holes.
Note that these panels may be either full glass or semi
privacy panels, depending on what was ordered.
They can also be located in any of the positions on the
front wall.
Make sure the next window panel is flush to the first one
and fasten it together with 2 ¾” (70mm)
connector bolts and a connector cap nut.
Using the provided hex keys, snug up all the bolts.
