ph: 519-923-9813 | [email protected]| web: www.dundalkleisurecraft.com
Fig 2a
Fig 2b
If you have ordered a harvia wood heater, skip past
these next 2 pages.
To install the electric heater, measure out where the
supports will go. These are usually 14 ¾” (37cm) high
and 14 ¾” (37cm) centered between the bench and the
front wall.
Install the supplied support screws into your marks as
shown. Screw them in until they are about ¼” (6mm)
out of the wall.
Hang the electric heater on the screws.
Screw 2 more screws in the bottom holes of the heater
and once the heater is level, you can tighten up all 4
screws.
19
Outdoor Pure Cube Sauna
Assembly Instructions
