ph: 519-923-9813 | [email protected]| web: www.dundalkleisurecraft.com
Fig 2a
Fig 2b
Ensure the outer handle lines up with the magnetic catch
on the door frame and then tighten the lag screws
completely.
10
Outdoor Pure Cube Sauna
Assembly Instructions
Make sure that the sauna overhangs 1 ½” (38mm) on all
sides.
Once the sauna walls are overhanging 1 ½” (38mm) on all
sides of the floor, use 2 ½” (64mm) screws to secure to
the base through the pre drilled holes.
Continue this on each panel of the sauna.
Use 2 screws in the wide panels and 1 screw in the
narrow panels.
Start placing the roof panels on top of the sauna.
Note that the roof panels are tapered , the larger end
goes towards the front (glass panels) of the sauna.
