Dulas Solar VC150, Handbook

Page: 19 / 156

19
THE REFRIGERATOR /FREEZER
POSITIONING
DO NOT POSITION THE VC150 REFRIGERATOR/FREEZER IN DIRECT
SUNLIGHT.
ENSURE THAT THE REFRIGERATOR IS WELL VENTILATED, ESPECIALLY
THE VENTILATION GRILLS AND CONDENSER.
WE RECOMMEND LEAVING a 500mm GAP AT EACH END OF THE
REFRIGERATOR
NEVER OBSTRUCT THE TEMPERATURE OR REGULATOR DISPLAYS
ENSURE THAT THE BATTERY BOX AND BATTERIES CAN BE INSPECTED
WHEN NECESSARY
NEVER BLOCK THE CIRCULAR COMPRESSOR VENTILATION FAN AT THE
FRONT
STARTING THE FRIDGE
The VC150 refrigerator is designed for continuous operation, therefore an ON/OFF
switch is not provided, as it is not necessary. The VC150 Freezer however, does not
an ON/OFF switch to allow for defrosting? This is situated at the rear right of the
cabinet, as viewed from the front, above the cable gland (see General Layout
diagram)
The VC150 refrigerator/freezer is operational when the power cable is connected to
the controller.
a) Strip the power cable to reveal 10 mm of brown or red (+) and blue or black (-)
wire.
b) Insert the cable into the black strain relief gland, located at
the rear, see ‘Cable Entry’ in the General Layout Diagram.
.
c) Connect to + & - terminals
on opposite side of the
strain relief gland.
.
d) TIGHTEN THE TERMINALS SECURELY, TIGHTEN
THE STRAIN RELIEF GLAND SECURELY.