27
Installation and Operation of
Product Holding Cabinets
Move the power switch on the Duke PHU
cabinet to its OFF position.
Insert the USB Flash drive into the PHU
cabinet’s USB port.
Turn unit to ON position
The program download will start
automatically.
Download complete when produt
temperatures appear. Wait up to 2 minutes
for program to load. The product names will
not appear on the screen until the wells heat
to the selected product set point.
Remove the Flash Drive from the PHU
cabinet’s USB drive.
REVISING A CABINET SETTING
Insert a blank jump drive into the PHU. Ensure
that the jump drive is blank. If an HCM34.cfm
file is on the jump drive it will overwrite the
programming loaded in the PHU.
If the program is on the jump drive and it is
the last one loaded into the PHU insert the
jump drive into a USB port on the computer.
Log onto the Website. On the Menu Creator
click Browse.
Find the jump drive on the computer and
locate the HCM34.cfm file.
Double click on the HCM34.cfm file. When it
appears in the dialog box, click Upload.
The cabinet with all of its programmed
products will appear.
Make the desired changes and repeat the
download process.
Summary of Contents for FWM 6-42 SERIES
Page 2: ...Installation and Operation of Product Holding Cabinets 2...
Page 40: ...Installation and Operation of Product Holding Cabinets 40 FWM34 4 High Schematic...
Page 42: ...Installation and Operation of Product Holding Cabinets 42...
Page 43: ...43 Installation and Operation of Product Holding Cabinets...