Installation and Operation of
Product Holding Cabinets
22
Time Decrement
This program is used to alter Hold Time when introducing
a product from another warming unit.
Example: Transfer CORN from another warmer with
19 minutes left on Hold Time.
1. Press and hold the Arrow Button corresponding
to the pan that’s being edited for three seconds.
The display will appear as shown below with a
FLASHING Status LED and a down arrow in the
Display indicating the timer is in decrement mode.
2. Repeatedly pressing the Arrow Button decrements
time by one minute per depression.
3. Holding down the button continuously will count
the time down.
4. To increment time, press the Enter Button. The
arrow on display will point up to denote incrementing
time as shown below.
5. Repeatedly pressing the Arrow Button increments
time by one minute per depression.
6. Holding down the button continuously will speed
the time up.
Ʌ
7. When the proper time is reached on the Display
release the Arrow Button and after 5 seconds unit
will accept new time and return to normal operation.
Menu Mode
This option is used to change Meal Set and view,
Linking, Hold Time and Hold Temp.
Enter Menu Mode
1. Press and hold the Enter Button for three seconds.
Status LED FLASHES GREEN and “MENU” is
displayed on left Display and “UP” is displayed
on right, indicating upper well information will be
displayed.
2. To view lower well information press the Down Arrow
Button – “DOWN” will appear in the right Display.
FLASHING Status LED will be present on side of
keypad corresponding to well being viewed.
3. Press the Enter Button to accept.
Change Meal Set
Note:
The Meal Set can be changed globally from
any keyboard.
1. Status LED stops flashing and “MEAL” “SET1”
appears on the Display.
2. Press the Enter Button again. Status LED
FLASHES indicating edit mode.
3. Use the Arrow Buttons to scroll to desired Meal Set
and press the Enter Button to accept. Status LED
stops flashing and desired Meal Set is displayed.
Summary of Contents for FWM 6-42 SERIES
Page 2: ...Installation and Operation of Product Holding Cabinets 2...
Page 40: ...Installation and Operation of Product Holding Cabinets 40 FWM34 4 High Schematic...
Page 42: ...Installation and Operation of Product Holding Cabinets 42...
Page 43: ...43 Installation and Operation of Product Holding Cabinets...
