6
Installation and Operation of:
FlexBake 5™ Integrated Ventilation System
UNPACKING INSTRUCTIONS
Tools required (NOT PROVIDED) for this
installation
Step 1
Carefully remove outer crating using a hammer
and crowbar/pry bar. Remove carton top.
• Hammer
• #2 Phillips Screwdriver
• Crowbar/Pry Bar • 5/16” Nut Driver
• Knife or Box Cutter
Step 2
Remove the screws securing the Exhaust Ring
and IVS Cover and remove these parts from the
assembly (save parts and screws).
IVS Cover
Exhaust Ring
Step 3
Remove the 4 wood screws (2 per side flange)
securing the IVS assembly to the wooden slats and
pallet. Carefully remove any blocking and lift the
IVS out of the carton and inspect for any shipping
damage.
Step 4
Apply foam tape to underside of IVS on the flanges
as shown. Foam tape is packed along with the IVS
unit.
Foam Tape
ELECTRICAL SHOCK HAZARD.
TASKS MUST BE PERFORMED BY A
QUALIFIED SERVICE TECHNICIAN OR
ELECTRICIAN.
Step 1
Turn the FlexBake 5™ Control Power Switch off and
disconnect external all poles mains supply.
Step 2
Remove the Facade Cover by removing the 16 (#8-
32) screws from the top.
SAVE SCREWS.
NOTE
: Save all screws nuts and
bolts for future use.
REMOVAL OF OLD FACADE
