Installation and Operation of:
FlexBake 5™ Integrated Ventilation System
Duke Manufacturing Co.
2305 N. Broadway
St. Louis, MO 63102
Phone: 314-231-1130
Toll Free: 1-800-735-3853
Fax: 314-231-5074
www.dukemfg.com
OVEN START-UP
ELECTRICAL SHOCK HAZARD.
TASKS MUST BE PERFORMED BY A QUALIFIED SERVICE TECHNICIAN OR ELECTRICIAN.
a. Have a qualified service technician or electrician connect the oven to the power supply.
b. Check for unrestricted airflow exiting from the IVS blower outlet and any attached vent piping.
CARE AND CLEANING
ELECTRICAL SHOCK HAZARD.
DO NOT WASH WITH WATER JET OR HOSE
DO NOT USE OVEN CLEANERS, CAUSTIC CLEANERS, DEGREASERS, ACIDS, AMMONIA
PRODUCTS, ABRASIVE CLEANERS, STEEL WOOL, OR ABRASIVE PADS CONTAINING IRON.
THESE CAN DAMAGE THE STAINLESS STEEL, DOOR GASKETS, PLASTIC SURFACES AND
SENSORS.
DAILY CLEANING INSTRUCTIONS
a. Turn power off to the unit by pressing the Control Power Switch off.
b. Wipe down the interior and exterior of the IVS with warm water and mild detergent using a soft cloth.
TROUBLESHOOTING
There are no user serviceable parts on the Duke IVS. If there is a malfunction, contact your Duke
Manufacturing authorized service agent or call 1-800-735-3853.
