Duke DSO 500, Service Manual

Page: 78 / 80

Service Manual for Speed Oven Model DSO 500
78
Deceleration enabled
Automatically stops acceleration
for stall prevention during
acceleration by set level of
percentage on rated current of
inverter at 100%
Automatically reduces frequency
for stall prevention during
acceleration by set level of
percentage on rated current of
inverter at 100%
Set frequency to be detected
during operation
Setting overtorque detection
disabled
Set overtorque detection level
by setting level in percentage of
rated current of inverters
Sets detection time of overtorque
Setting frequency not stored
Sets gain of torque
compensation function
Set slip value of motor
Set current for motor running
without load in percent of rated
motor current
Set slip compensation gain
Set time to compensate for mo-
tor slip
Stall prevention level dur-
ing acceleration
Stall prevention during
operation
Frequency detection level
Overtorque detection
function selection
Overtorque detection
level
Overtorque detection time
Up/down frequency com-
mand memory
Torque compensation
gain
Motor rated slip
Motor no-load current
Slip compensation gain
Slip compensation time
constant
INVERTER SETTINGS (Cont.)
NAME SETTING REMARKS DEFAULT PARAMETER
n56
n57
n58
n59
n60
n61
n62
n63
n64
n65
n66
n67
170%
160%
0Hz
0
160%
0.1s
0
1
2.9Hz
62%
0
2s
170%
160%
0Hz
0
160%
0.1s
0
1
2.9Hz
62%
0
2s