background image

114

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference 

page

Sound does not 

come out.

The signal cables are not correctly connected.

Correctly connect the audio cables.

~

 13

The MUTE function is working.

Restore the sound pressing 

MUTE

 or 

/

-

 button 

on the remote control.

22

The volume is adjusted to an extremely low level.

Adjust the volume to a higher level using the menu function 

or the remote control.

22, 48, 

49

The AUDIO SOURCE/SPEAKER setting is not correct.

Correctly set the AUDIO SOURCE/SPEAKER in AUDIO menu.

48

The mode selected for HDMI AUDIO is not suitable.

 

Check each of the two modes provided and select the suit-

able one for your HDMI

TM

 audio device.

49

No pictures are

displayed.

The signal cables are not correctly connected.

Correctly connect the connection cables.

~

 13

The brightness is adjusted to an extremely low level.

Adjust BRIGHTNESS to a higher level using the menu function.

35

The computer cannot detect the projector as a plug and play monitor.

Make sure that the computer can detect a plug and play 

monitor using another plug and play monitor.

10

The BLANK screen is displayed.

Press 

BLANK

 button on the remote control.

29

The USB TYPE B port is selected as the picture input 

source even if MOUSE is selected for USB TYPE B.

 

Select USB DISPLAY for USB TYPE B in OPTION menu to 

project the picture input to the port. Otherwise select other 

port for picture input.

57

The projector does not recognize the USB storage 

device inserted into USB TYPE A port. 

Use the REMOVE USB function first, remove the USB 

storage device, and then insert it into the port again. 

Before removing the USB storage device, be sure to use 

the REMOVE USB function on the thumbnail screen, which 

appears when the 

USB TYPE A

 port is selected as the input 

source.

12

"Waiting for connection." remains displayed even 

though the USB TYPE B port is selected.

Remove the USB cable and reconnect after a while.

10

(continued on next page)

Summary of Contents for 8107WIB



























































































































Reviews: