Dukane 8107WIB User Manual Download

Page: 121 / 122

121

Phenomenon

Cases not involving a machine defect

Reference

page

The interactive

pen stops

working.

The interactive pen may stop working when plugging

in the USB cable or booting up a computer on which

Starboard Software has been installed.

・

Connect the projector after the computer starts up, making

sure the system is ready to use.

・

If you got the message dialog showing "Projector is not

connected" after "Check Connection" command through the

Starboard Software menu, and the interactive pen still does

not work, turn the projector power off and try again from the

beginning.

The interactive

pen or system

does not work

properly or

intermittently

works.

This may be due to exhaustion of the battery of the pen.

Replace the battery with new one. Use only the specified

and perfect battery. When putting it in, be careful not to

make a mistake in polarity.

This may be due to poor contact of the battery in the

pen.

Remove the battery and load it again. Use only the specified

and perfect battery. When putting it in, be careful not to

make a mistake in polarity.

There may be obstacles in between the interactive pen

and sensors on the projector.

・

Remove all things between the pen and sensors.

・

The way of you hold the pen or your position may affect

the system. Hold the pen as perpendicular to the interactive

surface as possible and be careful not to block the path

from the pen to the sensors.

The mouse

cursor or

drawing image

does not match

with the actual

pen tip point.

It is recommended to keep the room temperature between

16°C and 35°C when using the interactive function.

–

Calibrate again to optimize the interactive system.

The LiveViewer

Software and

Starboard

Software may

work at the

same time.

The LiveViewer may not display the annotations that

are made by Starboard Software.

Use the latest LiveViewer software to support Starboard

software annotation.

Meantime, please use Starboard software on

COMPUTER

HDMI

inputs.

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)

Summary of Contents for 8107WIB



























































































































Search results

Summary of Contents for 8107WIB

Reviews:

Related manuals for 8107WIB

Brands by name

Popular brands

Dukane 8107WIB, User Manual

Search results

Summary of Contents for 8107WIB

Reviews:

Related manuals for 8107WIB

Brands by name

Popular brands