Dukane 8107WIB User Manual Download

Page: 106 / 122

106

Caring for the mirror and lens

If the projection mirror or lens is flawed, soiled or fogged, it could cause deterioration

of display quality. Please take care of the mirror and lens, being cautious of handling.

Turn the projector off and unplug the power cord

from the power outlet. And cool the projector down

by leaving it for a while as it is.

The lens door can be opened manually.

Please hold both side of the lens door and slowly

open it until it is locked with clicking sound.

Use an air blower to blow away dust on the lens

and on the mirror before wiping.

Wipe softly the mirror and lens with a damped soft

cleaning cloth for lens on the market, being careful

not to give any damage on the mirror and lens.

To close the lens door properly, please take the

following procedure.

(1) Insert the power cord with the lens door opened.

(2) The power indicator will light in orange, and the

lens door closes automatically. Do not touch the

lens door when the door is closing. Do not allow

anything to obstruct the lens door.

• When the lens door is closed manually, it may not shut properly.

•

The lens door may not close when the LENS DOOR LOCK function of the

SERVICE item in the OPTION menu is set to ON. Refer to the LENS DOOR

LOCK function of the SERVICE item in the OPTION menu (



NOTE

►Before caring for the projection mirror and lens, turn the

projector off and unplug the power cord, then cool the projector sufficiently.

►Do not use a vacuum cleaner to clean the projection mirror or lens, since it

might give some damage.

►Do not use cleaners or chemicals other than those specified in this manual.

Pay special attention to the mirror and lens as these materials could cause

serious damage to either.

WARNING

►Be careful not to pinch your finger with the lens door, to prevent

an injury.

CAUTION

Cleaning cloth

Blower

Maintenance

Summary of Contents for 8107WIB



























































































































Search results

Summary of Contents for 8107WIB

Reviews:

Related manuals for 8107WIB

Brands by name

Popular brands

Dukane 8107WIB, User Manual

Search results

Summary of Contents for 8107WIB

Reviews:

Related manuals for 8107WIB

Brands by name

Popular brands