Dukane 4A3610B, Operation Manual

Page: 48 / 148

Viewing and Connecting to Set Reminders
Follow these steps to view previously set reminders. You can only do this when the base
master is not in communication with a station.
1. Press REMIND . These selections are available:
DEFAULT
Rem Scan: RED = 1
Rem Scan: AMBER = 2
Rem Scan: GREEN = 3
Review = VOL DOWN
YOUR SYSTEM
Rem Scan: ____________________ =1
Rem Scan: ____________________ =2
Rem Scan: ____________________ =3
Review = VOL DOWN
Press the up or down arrow on the VOL key to scroll the selections.
2. Press 1 , 2 , or 3 to scan the stations placed on the selected reminder level.
a. “Waiting for Data” appears briefly.
b. The display shows the station number where a reminder has been set (1040),
plus the staff level (GREEN). The number of reminders set at the selected level
flashes at the far right of the display (1 of 3). See
Figure 2-19 . Use the VOL key
to scroll through the other reminders.
c. If there are no reminders at the selected level, “No Rooms RED” (“AMBER” or
“GREEN”) appears.
3. Press #CNCL once to return to step 1 to select another reminder level.
—OR—
Press *ANS to connect to the station that appears on the display, talk to the patient,
then press #CNCL to end the call.
Note:
Pressing #CNCL after connecting to the station DOES NOT cancel the call.
Reminders can only be canceled at the station that originally placed the call.
—OR—
Press #CNCL twice to exit the reminder function.
2-18 ProCare 6000 Operation Manual
Using the REMIND Button
1040 GREEN 1 of 3
Figure 2-19: Display Showing Level and Number of Reminders Set