DUI Weight & Trim Classic Owner'S Manual Download Page 2 | Manualshive

Page: 2 / 26

DUI Weight & Trim Classic Owner'S Manual Download Page 2

WEIGHT & TRIM SYSTEM

OWNER’S MANUAL

Congratulations on purchasing a DUI Weight & Trim System.The Weight &
Trim System is different from conventional weight belts in that it distributes
the weight between the waist and the shoulders and eliminates the slipping
and rotating problems common with traditional weight belts. Both the Weight
& Trim Classic and Weight & Trim II Systems allow the diver to adjust the
height of the weights.The Weight & Trim Classic provides even more
adjustment capabilities and allows the weight to be moved forward or back.
These adjustments enable the diver to better trim themselves in the water
while diving.

Do not use this Weight & Trim System until you have read, understood, and
followed all instructions and safety precautions in this owner’s manual and
practiced emergency weight drop skills. If the owner’s manual is unavailable or
lost a copy may be obtained by contacting DUI. A copy may also be
downloaded from the website at www.DUI-Online.com.

Diving Unlimited International, Inc.
1148 Delevan Dr., San Diego, CA 92102-2499 USA
Tel: 800-325-8439 or 619-236-1203
Fax: 619-237-0378
[email protected]

Manual Part# 550420

1

Introduction................

«
1
2
3
4
...
»

Summary of Contents for Weight & Trim Classic



























Reviews:

No comments