DUI Weight & Trim Classic, Owner'S Manual, Page: 14 / 26

• Set the Weight & Trim System on the ground with the back of the unit facing
you with the waist buckle open.
• While standing with your arms straight at your sides, cross your straight
arms in front of you, so your hands are pointing toward the ground.
• Maintain this position and bend down to grab the harness by the shoulders.
• Lift the unit from the ground and, with caution, swing the unit to the left or
right and onto your shoulders.
• With the weight evenly distributed on each shoulder, fasten the waist belt.
The buckle does not need to be worn as snugly as a standard weight belt.
The shoulder straps support the weight and determine the position of the
belt.
• The operation of your buoyancy compensator should not interfere with
your Weight & Trim System.The operation of your Weight & Trim System
should not interfere with your buoyancy compensator.Test the operation of
each piece of equipment prior to diving. In particular, you must be able to
drop your weights without any interference from your buoyancy
compensator or any other piece of equipment.
!! WARNING !!
Prior to diving with your Weight & Trim System, put on
the system and your buoyancy compensator. Check to
be sure that each of these pieces of equipment operate
properly without interference from the other.You must
be able to ditch your weights quickly and easily. In
particular, check to be sure that you can operate the
release cords on the Weight & Trim System without
interference from your BC.
Do not dive with the system unless you are able to
operate the release cords properly.
13
Preparation...........................................