DUI Weight & Trim Classic, Owner'S Manual, Page: 12 / 26

LOADING THE WEIGHTS
The right and left weight pocket assemblies have two pockets. Each pocket can
accept either molded lead weights and/or lead shot packaged in pouches of up
to 10 pounds (4.5 kg) of weight for a total of 40 pounds (18 kg). Some styles
of lead weights may limit the maximum capacity of the pockets.
To load the pockets, open the pocket flaps and insert the weights into the
pockets then close the flaps by pulling down on the flaps and engaging the
hook and pile fasteners.The flaps are properly closed when the hook on the
flaps fully engage the pile on the pockets. Do not overfill the pockets.
Overfilling the pockets prevents the hook on the flaps from fully engaging the
pile on the pockets and the weights will not be held securely in the pockets.
WEIGHT DISTRIBUTION AND TRIM
Most divers distribute their total weight as evenly as possible within the four
pockets. However, you may want to experiment with weight distribution in
each pocket. Putting the heavier portion of the weight in the front pocket will
effect your trim differently than putting the heavier portion of the weight in
the back pocket. Experimentation will tell you the weight distribution that best
meets your diving needs.
11
Preparation...........................................