Duevi CE818, User Manual

Page: 20 / 28

20
DISARMING (WITHOUT ALARM)
With User Code With Electronic Key
1. Press the “ # ” button 1. Pass once a CHT key over a key reader
2. Digit the User Code (factory: “100000”)
3. A “beep” confirms arming, the LED on key reader switch
off and the “ # ” button on keyboard switch on
2. A “beep” confirms arming, the LED on key reader switch off
and the “ # ” button on keyboard switch on
Disarming

Zones
All the zones are disabled
Technologic zones stay always
Sound alerts
One “beep” to confirm disarming
In case entering by a delayed zone before disarm, a “beep”
series signals the Entry time (30 seconds)
Visual alerts
Key reader: LED off
Keyboard:
# button solid on
Control p. outputs *
Output 1 (“+INS”) changes status
Output 2 (“TC”) changes status
GSM alerts ** SMS for “Dsiarming” to enabled numbers
* If no alarm during the last arming
** If GSM module installed
DISARMING (WITH ALARM)
In case of alarm , disarm as descrived above.
The siren stops sounding and all the alerts via GSM are interrupted (SMS or calls – if GSM module installed).
The LED on key readers will blink RED for about 1 minute to advice the
alarm memory .
To read the Event log , download it from control panel on a USB memory (option for installer).
1x