Duevi CE818, User Manual

Page: 17 / 28

17
ARM / DISARM
By factory setting, the User 1 code is enabled as MASTER type and code “100000”
TOTAL ARMING
To arm the system in TOTAL :
With User Code With Electronic Key
1. Press the “ F1 ” button 1. Pass once a CHT key over a key reader
2. Digit the User Code (factory: “100000”)
2. A “beep” confirms arming, the RED LED on key reader and
“ F1 ” button on keyboard switch on
3. A “beep” confirms arming, the RED LED on key reader and
“ F1 ” button on keyboard switch on
4. A “beep” series for about 30 seconds (exit time) are
emitted, after that the system is active
3. A “beep” series for about 30 seconds (exit time) are
emitted, after that the system is active
TOTAL arming

Active zones *
All the zones enabled in Total mode but bypassed zones by
the user (User menu – only if Master)
Factory:
All the zones are enabled
The zone 1 has Delay (Entry time = 30 seconds)
Sound alerts
One “beep” to confirm arming
A “beep” series during Exit time (30 s)
Visual alerts
Key reader: RED LED, solid on
Keyboard:
F1 button solid on
Control p. outputs *
Output 1 (“+INS”) changes status
Output 2 (“TC”) changes status
GSM alerts ** SMS for “Total arming” to enabled numbers
* It is possible to change the settings by Installer menu or software
** If GSM module installed
1x